Ford Explorer Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
My 2010 2wd explorer 4.0L is throwing a P0122 code. I back probed the tps sensor and manually actuated the throttle plate. I put my multimeter black lead on my neg battery terminal amd back probed the bottom wire, on my harness if appears to be a green wire with a strip, when the plate is actuated the multimeter runs through the numbers relatively smoothly, when I go from 3.9 to 4 it flashes OL but I beleave thats the auto range function because it doesn't flash OL when I move from 4.0 to 3.9.

Closed throttle reads: 1.33
WOT reads: 4.46

Does that sound right? I thought closed it was supposed to be like around 1v and wot at 5v. Any ideas?

This is the only p code my scan tool is picking up.
Hood Automotive tire Motor vehicle Bumper Automotive design
 
1 - 1 of 1 Posts
Top