Ford Explorer Forum banner
1 - 1 of 1 Posts

·
Registered
2017 Explorer Sport - Radar Cruise, Cooled Seats, Panoramic Roof
Joined
·
2 Posts
Discussion Starter · #1 ·
OK, this is my inaugural thread as a newbie so apologies if I have missed an existing thread on the same subject. But I need some help as my low mileage 2017 Explorer Sport has thrown up a load of OBD codes.

Plugged in my BlueDriver OBD connection to find out why I had a check engine light and suddenly got the following:

P0010"A" Camsaft Position Actuator Control Circuit/Open Bank 1Replace oxygen sensor (02 sensor)
P0020"A" Camsaft Position Actuator Control Circuit/Open Bank 2Replace oxygen sensor (02 sensor)
P013502 Sensor Heater Circuit Bank 1 Sensor 1Replace oxygen sensor (02 sensor)
P014102 Sensor Heater Circuit Bank 1 Sensor 2Replace oxygen sensor (02 sensor)
P015502 Sensor Heater Circuit Bank 2 Sensor 1Replace oxygen sensor (02 sensor)
P016102 Sensor Heater Circuit Bank 2 Sensor 2Replace oxygen sensor (02 sensor) OR
Replace oxygen sensor (02 sensor) Sensor Wiring Harness
P0443EVAP System Purge Control Valve "A" CircuitReplace Vapor Canister Purge Solenoid
P0446EVAP System Vent Control CircuitReplace EVAP Canister Vent Solenoid

Has anyone had a similar experience? and are any of these serious enough to require me to stop driving until fixed?

I have watched a few YT vids, removed and tried cleaning the EVAP Purge Solenoid, and I am happy to have a crack at any of this that does not require a significant engine dismantle.

Extra challenges include: when I enter my VIN to search for replacements I find parts that do not look like the part on my car. Plus, when I search on Canister Purge Solenoid vs. Canister Vent Solenoid it returns the same part!

Any input welcome, going crazy here. Car seems to running perfectly well BTW.

Cheers.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top