Ford Explorer Forum banner

illuminated door sill color change

3344 Views 1 Reply 2 Participants Last post by  ExplorerPIU2013
has anyone attempted to change out the stock sky blue color on the door sill plates?

I'm going to attempt to change mine here within the next few months and was wondering if anyone had any useful hints or tips on doing so
1 - 2 of 2 Posts
Once you take it apart,
The leds if so equipped, should be easily changed to the color of your choice.

Depends where Ford installed the voltage lowering resistors.
Most led operate on 3 to 4.5 volt dc polarity direction is important.

Sent from my SM-G930P using Tapatalk
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top